Description
- Stronger and more stable structure - up to 20% heavier than many competitors. Two (2)” / 51mm reinforcement tubes are welded inside the 11” x 7” with 1/4” wall / 279mm x 178mm with 6mm wall columns to provide better stability with heavier loads.
- Corrosion resistant protection - steel components are wheel-a-brator shot blasted and acid washed before a “double bake” powder coat finish is applied.
- Lifts higher to provide more under car work area - the 70-1/2’” / 1791mm long cylinder stroke provides 76” / 1930mm lift without adapters with a maximum attainable lift height of 87” / 2210mm.
- Flexible vehicle loading - Flexmetric arm design uses three (3) piece “offset” front and straight (3) piece rear lifting arms for optimum asymmetric and symmetric loading opportunities.
- Reduced installation costs - field adjustable height and width can easily adapt to most installation dimensions. Premium North American Components - North American made Bucher 2HP / 1.5kw power unit, 3/8”/ 9.5mm equalizing cables and 2” / 51mm ID hydraulic cylinders provide longer more dependable service life.
- Reduced vehicle setup time - Acme screw “drop in” style lift pads have a lowered height with rubber pad of 4” / 102mm and can be extended by 1-1/2” / 38mm, 3” / 76mm or 6” / 152mm using nickel plated drop in adapters. Power unit can be installed on either column.
- Quieter operation less than <75 decibels - rubber mounting grommets reduce power unit noise. Car door protection - 11” x 2” /279mm x 51mm rubber door bumpers are mounted on the face of both lifting carriages to reduce door damage.
- More models to chose from - standard Flexmetric design with 3 piece lifting arms, symmetric version with equal length straight arms, extended height 172” / 4389mm and choice of red or blue.
| Capacity | 10,000 lb. / 4.5T |
| Overall Height | 138" or 148" / 3505mm or 3759mm |
| Under Bar Clearance (Field Asjustable) | 131" or 141" / 3327mm or 3581mm |
| Overall Width | 135-1/2" / 3429mm |
| Width Between Columns | 112-3/4" / 2845mm |
| Drive Thru Width | 92" / 2337mm - symmertric 100”/ 2540mm |
| Height to Lowered Lift Pad | 4" / 102mm |
| Raised Height with Standard Pad | 76" / 1930mm |
| Raise Height with Adapters | 87" / 2210mm |
| Lifting Time | 55 seconds |
| Front Arm Reach | 19-3/4" to 42" / 502mm to 1067mm - Symmetric 35” to 60” / 889mm to 1524mm |
| Rear Arm Reach | 35" to 60" / 889mm to 1524mm |
| Standard Power Requirements | 230 Volts - 50/60 Hz - 1 PH - 20amp |
| Shipping Weight | 1,980 lbs. / 900 kg. |
| Model: TLS210NRx1 | Height as listed |
| Model: TLS210SRx1 | Height as listed, Symmetric, Equal Arms |
| Model: TLS210NXx1 | Extended Ht. 172” / 4370mm |
| Model: TLS210SXx1 | Extended Ht. 172” / 4370mm Symmetric |
 |
 |
 |
| Three piece, offset arms front and rear for asymmetric and symmetric loading | Drop in screw adjustment style lifting pads | Height adapters #TLS2PTA4-2 |
 |
 |
 |
| 3/8” / 9.5mm non fatigue cables with 3-1/2” / 89mm pulleys | 2” / 51mm tube column reinforcement | Single point lock release |
