Description
- Corrosion resistant protection - steel components are wheel-a-brator shot blasted and acid washed before a “double bake” powder coat finish is applied.
- Lifts higher to provide more under car work area - the 70-1/2’” / 1791mm long cylinder stroke provides 76” / 1930mm lift without adapters with a maximum attainable lift height of 87” / 2210mm.
- Flexible vehicle loading - Flexmetric arm design uses three (3) piece “offset” front and straight (3) piece rear lifting arms for optimum asymmetric and symmetric loading opportunities.
- Reduced installation costs - field adjustable height and width can easily adapt to most installation dimensions. Premium North American Components - North American made Bucher 2HP / 1.5kw power unit, 3/8”/9.5 equalizing cables and 2” / 51mm ID hydraulic cylinders provide longer more dependable service life.
- Reduced vehicle setup time - Acme screw “drop in” style lift pads have a lowered height with rubber pad of 4” / 102mm and can be extended by 1-1/2” / 38mm, 3” / 76mm or 6” / 152mm using nickel plated drop in adapters. Power unit can be installed on either column.
- Quieter operation less than <75 decibels - rubber mounting grommets reduce power unit noise. Car door protection - 11” x 2” / 279mm x 51mm rubber door bumpers are mounted on the face of both lifting carriages to reduce door damage.
- More models to chose from - standard Flexmetric design with 3 piece lifting arms, symmetric version with equal length straight arms, and choice of red or blue.
| SPECIFICATIONS | FLEX-METRIC | SYMMETRIC STD | SYMMETRIC WIDE |
| Capacity | 12,000 lbs. / 5.5T | 12,000 lbs. / 5.5T | 12,000 lbs. / 5.5T |
| Overall Height (Field Adjustable) | 158 7/8” / 4035 mm or 154 7/8” / 3934 mm | 158 7/8” / 4035 mm or 154 7/8” / 3934 mm | 154 7/8” / 3934 mm |
| Under Bar Clearance | 153 1/2” / 3899 mm or 149 1/2” / 3797 mm | 153 1/2” / 3899 mm or 149 1/2” / 3797 mm | 149 1/2” / 3797 mm |
| Overall Width (Field Adjustable) | 137-1/8” / 3483mm | 137-1/8” / 3483mm | 145 1/8” / 3686 mm |
| Width Between Columns | 109-3/4” / 2788mm | 109-3/4” / 2788mm | 117 3/4” / 2991 mm |
| Drive Thru Width | 89-1/8” / 2264mm | 97 5/8” / 2480mm | 105 5/8” / 2683 mm |
| Height to Lowered Lift Pad | 4" / 102mm | 4" / 102mm | 4" / 102mm |
| Raised Height with Standard Pad | 76" / 1930 mm | 76" / 1930 mm | 76" / 1930 mm |
| Raise Height with Adapters | 86 5/8” with 3” & 6” adapter / 2200 mm with 76 mm & 152 mm adapter | 86 5/8” with 3” & 6” adapter / 2200 mm with 76 mm & 152 mm adapter | 86 5/8” with 3” & 6” adapter / 2200 mm with 76 mm & 152 mm adapter |
| Front Arm Reach | 21” to 39-3/4” / 533mm to 1010mm | 35” to 59 5/8” / 889 mm to 1515 mm | 35” to 59 5/8” / 889 mm to 1515 mm |
| Rear Arm Reach | 35” to 59 5/8” / 889mm to 1515mm | 35” to 59 5/8” / 889mm to 1515mm | 35” to 59 5/8” / 889mm to 1515mm |
| Lifting Time | 75 seconds | 75 seconds | 75 seconds |
| Standard Power Requirements | 230 Volts - 60 Hz - 1PH - 20 Amp | 230 Volts - 60 Hz - 1PH - 20 Amp | 230 Volts - 60 Hz - 1PH - 20 Amp |
| Shipping Weight | 2,300 lbs./ 1T | 2,300 lbs./ 1T | 2,300 lbs./ 1T |
| Model Number | TLS212NRx1 | TLS212SRx1 | TLS212SRx1 |
 |
 |
 |
| Three piece, offset arms front and rear for asymmetric and symmetric loading | Drop in screw adjustment style lifting pads | Height adapters #TLS2PTA4-2 |
 |
 |
 |
| 3/8” / 9.5mm non fatigue cables with 3-1/2” / 89mm pulleys | Adjustable Height | Single point lock release |
- Low maintenance problem free design – 72.5” (1842mm) stroke 3” (76.2mm) diameter high pressure cylinder mounted under runway with prestressed 3/8” / 9.5mm lifting cables and 4” / 102mm steel pulleys. Tough wheel-a brator finished steel structure with premium double bake finish.
- Built & Tested to Commercial Safety Standards – 3rd party tested by M.E.T laboratories to meet or exceed the ANSI/ALI ALCTV 2017 Standard. Single point automatic “deadman” safety with adjustable locking ladders. • Premium accessories are included with each lift – each lift comes equipped with a removable “caster” wheel kit, three (3) steel drip and drain pans and one (1) HD steel jacking tray. A 3,500 lb / 1.6T hydraulic jacking beam, aluminum approach ramps and centre runway storage panels are available as options.
- Residential compatible energy efficient power units available in either 2HP 220v 11 amp or 1HP 110v 15 amp.
- Flexible vehicle loading – low to the floor 4.3” / 111mm deck height with low angle removable approach ramps accommodates exotic sports cars and vehicles with low clearance ground effects. Runways 18.7” / 475mm wide. The overall width between the outside of the runways is 74 7/8” (1900mm) & 80 3/4”(2054mm).
- Premium North American Components – North American made Monarch (Bucher) power unit, 3/8” / 9.5mm lifting cables, cylinders and hoses. • No Wheel Base Restriction – Runways and columns are reinforced so that all wheel base vehicles can be lifted at the rated capacity. • More models to chose from – 8,000 lb. (3.6T) or 9,000 lb. (4T) capacities with lifting heights of either 77 1/4” (1962mm) or 84 3/4” (2153mm). Runways are 165-3/8” (4201mm) or 180-1/2”(4585mm) long. Power units available in high efficiency 220v single phase
Portable Steel Jacking Tray
Removable Caster Wheels
3 Steel Drip & Drain Trays
Wedge Anchors & Shims
Diamond Plate Steel Ramps
Adjustable Locking Ladders
Automatic Cable Break Lock
Reinforced Runways
Double Bake Powder Coat
Lightweight 36” or 49” Aluminum Ramps
3,500 lb. (1.6T) Sliding Scissor Jack
4,500 lb. (2.0T) Sliding Scissor Jack
Removeable center platforms
4,400 lb. (2T) Double Air Bag Jack
Power Unit 90 Degree Mounting
| Feature | 9K REGULAR |
| Capacity | 9,000 lbs / 4T |
| Overall Length with Ramps | 222-1/4” (5645mm) |
| Runway Length | 180-1/2” (4585mm) |
| Front to Rear Outside Columns | 184-1/2” (4686mm) |
| F/R Inside Columns | 172-1/2” (4382mm) |
| F/R Outside Column Baseplates | 190-1/2” (4839mm) |
| Approach Ramp Length | 36-1/2” (927mm) |
| Width Between Runways | 43-1/2” (1105mm) |
| Runway Width | 18-3/4” (476mm) |
| Width Outside Runways | 80-3/4” (2051mm) |
| Overall Width (no Power Unit) | 109-1/2” (2781mm) |
| Column Height | 94-1/4” (2394mm) |
| Runway Height | 4-1/4” (108mm) |
| Lifting Height | 4 3/4” (120mm) ~ 84 3/4” (2152mm) |
| Max. Clearance (Under Runway) | 80” (2032mm) |
| Drive Thru Clearance (vehicle parked under runway) | 100-1/4” (2550mm) |
| Drive Thru Clearance (vehicle parked on runways ) | 96-1/4” (2445mm) |
| Accessories Included | Casterwheels, 3 steel drip/drain trays and 1 steel jacking tray, 4 removable wheel stops, steel approach ramps |
| ALI Approved Mechanical Locking System | Standard on all Models |
| Power Requirement | 110V / 60Hz / 1Ph. – 15 amp. Or 230V / 60Hz / 1Ph – 11 amp |
| Shipping Weight | 1850 lb. / 839 kg |
