15,000 lb. Capacity Alignment or Service 210” (5334mm) or 238” (6033mm) Long Runways


Alignment TLS415ALCRx1 / Extended TLS415ALCXx1

Service TLS415FDCRx1 / Extended TLS415FDCXx1


  • Built to higher quality standard; 100% North American made - premium US Bucher 2HP / 1.5kw power unit.
  • Corrosion resistant protection - steel components are wheel-a-brator shot blasted and acid washed before a “double bake” powder coat finish is applied.
  • Superior structural strength provides longer life and more precise alignments - Non flex double wall 23” / 584mm wide runways with built in “Z” rail. Heavy duty 10” x 8-3/8” x 1/4” wall / 254mm x 213mm x 6mm wall columns and 3” x 8-1/4” / 72mm x 210mm tube traverse beams.
  • Greater flexibility with more models to chose from - Available in two runway lengths with built in wheel alignment or service deck. Lift can be ordered in red or blue.
  • Premium options and accessories can expand the capabilities and service life -Stainless steel radius plates and rear steer plates, built in tire inflation hoses, removable work steps, LED runway lighting and premium long life 5 year warranty HD jacking beams.
  • Lower maintenance costs - Zirk style grease fittings at all 1-1/2” / 38mm plated hinge pins. Runway under rear slip plates is open to prevent water and dirt collecting.Thirty 7/8” / 22mm enclosed plated steel slip plate balls provide better support with minimal maintenance.
  • Extended Life “Non Twist” Cable design - Machined steel nickel plated 9” / 229mm pulleys with bronze self lubricating bushings.Non spin fatigue resistant 9/16” / 14mm cables are routed on double stacked pulleys (versus four stacked) to reduce stress and wear.
  • Low pressure hydraulics provides longer life - 4”ID x 65” /102mm ID x 1651mm cylinder is mounted under the runway and use a premium “Parker” seal and wear ring with chrome plated plunger shaft.
  • Designed for optimum productivity - Single point control with stainless steel cylinder air releases engage 12 locking positions. Adjustable locking ladders 81” x 2-3/4” x 3/8” / 2057mm x 70mm x 9.5mm thick allow for accurate levelling. Power unit can be mounted on a front or rear column. Built in runway compressed air outlets front and rear.
Capacity 15,000 lbs / 6.8T
Overall Length Extended Model 285" / 7239 mm
Overall Length Standard Model 258" / 6553 mm
Deck Length Extended Model 238” / 6045mm
Deck Length Standard Model 211” / 5359mm
Overall Width 137 1/2” / 3493mm
Deck Width 23” / 584mm
Lowered Height 8 3/8” / 213mm
Raised Height 75 / 1905mm
Min. 4 Wheel Align. WB 84” / 2134mm
Max.4 Wheel Align. WB 164-1/2” / 4178mm
Max. 2 Wheel Align. WB 209” or 182” / 5309mm or 4623mm
Max. Service WB 220” or 193” / 5588mm or 4902mm
Lift Time 70 seconds
Power Requirement 230V - 60Hz - 1 Ph - 20amp
Shipping Weight 4,750 lb. / 2.2T
Part Number TLS415ALOXR1/ TLS415FDOXR1
 Jacking beam TLS-RJ7500HD  Stainless Steel Turnplates TLSSTP  Runway Step Platforms TLSMWS
 Open runway slots under rear slip plates  Pulley and cables  Double wall deck with Z rail