Description
- Low maintenance problem free design – 72.5” (1842mm) stroke 3” (76.2mm) diameter high pressure cylinder mounted under runway with prestressed 3/8” / 9.5mm lifting cables and 4” / 102mm steel pulleys. Tough wheel-a brator finished steel structure with premium double bake finish.
- Built & Tested to Commercial Safety Standards – 3rd party tested by M.E.T laboratories to meet or exceed the ANSI/ALI ALCTV 2017 Standard. Single point automatic “deadman” safety with adjustable locking ladders. • Premium accessories are included with each lift – each lift comes equipped with a removable “caster” wheel kit, three (3) steel drip and drain pans and one (1) HD steel jacking tray. A 3,500 lb / 1.6T hydraulic jacking beam, aluminum approach ramps and centre runway storage panels are available as options.
- Residential compatible energy efficient power units available in either 2HP 220v 11 amp or 1HP 110v 15 amp.
- Flexible vehicle loading – low to the floor 4.3” / 111mm deck height with low angle removable approach ramps accommodates exotic sports cars and vehicles with low clearance ground effects. Runways 18.7” / 475mm wide. The overall width between the outside of the runways is 74 7/8” (1900mm) & 80 3/4”(2054mm).
- Premium North American Components – North American made Monarch (Bucher) power unit, 3/8” / 9.5mm lifting cables, cylinders and hoses. • No Wheel Base Restriction – Runways and columns are reinforced so that all wheel base vehicles can be lifted at the rated capacity. • More models to chose from – 8,000 lb. (3.6T) or 9,000 lb. (4T) capacities with lifting heights of either 77 1/4” (1962mm) or 84 3/4” (2153mm). Runways are 165-3/8” (4201mm) or 180-1/2”(4585mm) long. Power units available in high efficiency 220v single phase
Portable Steel Jacking Tray
Removable Caster Wheels
3 Steel Drip & Drain Trays
Wedge Anchors & Shims
Diamond Plate Steel Ramps
Adjustable Locking Ladders
Automatic Cable Break Lock
Reinforced Runways
Double Bake Powder Coat
Lightweight 36” or 49” Aluminum Ramps
3,500 lb. (1.6T) Sliding Scissor Jack
4,500 lb. (2.0T) Sliding Scissor Jack
Removeable center platforms
4,400 lb. (2T) Double Air Bag Jack
Power Unit 90 Degree Mounting
| Feature | 8K REGULAR |
| Capacity | 8,000 lbs / 3.6T |
| Overall Length with Ramps | 207” (5259mm) |
| Runway Length | 165-1/4” (4197mm) |
| Front to Rear Outside Columns | 169-1/2” (4305mm) |
| F/R Inside Columns | 157-1/4” (3994mm) |
| F/R Outside Column Baseplates | 175-1/2” (4458mm) |
| Approach Ramp Length | 36-1/2” (927mm) |
| Width Between Runways | 37-1/2” (953mm) |
| Runway Width | 18-3/4” (476mm) |
| Width Outside Runways | 74-3/4” (1899mm) |
| Overall Width (no Power Unit) | 103-1/2” (2629mm) |
| Column Height | 86-1/4” (2191mm) |
| Runway Height | 4-1/4” (108mm) |
| Lifting Height | 4 3/4” (120mm) ~ 77 1/4” (1962mm) |
| Max. Clearance (Under Runway) | 72-1/4” (1835mm) |
| Drive Thru Clearance (vehicle parked under runway) | 94-1/2” (2400mm) |
| Drive Thru Clearance (vehicle parked on runways ) | 90-1/4” (2295mm) |
| Accessories Included | Casterwheels, 3 steel drip/drain trays and 1 steel jacking tray, 4 removable wheel stops, steel approach ramps |
| ALI Approved Mechanical Locking System | Standard on all Models |
| Power Requirement | 110V / 60Hz / 1Ph. – 15 amp. Or 230V / 60Hz / 1Ph – 11 amp |
| Shipping Weight | 1600 lb. / 725.7 kg |
