Description
- Built to higher quality standard; 100% North American made - premium US Bucher 2HP / 1.5kw power unit.
- Corrosion resistant protection - steel components are wheel-a-brator shot blasted and acid washed before a “double bake” powder coat finish is applied.
- Superior structural strength provides longer life and more precise alignments - Non flex double wall 23” / 584mm wide runways with built in “Z” rail. Heavy duty 10” x 8-3/8” x 1/4” wall / 254mm x 213mm x 6mm wall columns and 3” x 8-1/4” / 72mm x 210mm tube traverse beams.
- Greater flexibility with more models to chose from - Available in two runway lengths with built in wheel alignment or service deck. Lift can be ordered in red or blue.
- Premium options and accessories can expand the capabilities and service life -Stainless steel radius plates and rear steer plates, built in tire inflation hoses, removable work steps, LED runway lighting and premium long life 5 year warranty HD jacking beams.
- Lower maintenance costs - Zirk style grease fittings at all 1-1/2” / 38mm plated hinge pins. Runway under rear slip plates is open to prevent water and dirt collecting.Thirty 7/8” / 22mm enclosed plated steel slip plate balls provide better support with minimal maintenance.
- Extended Life “Non Twist” Cable design - Machined steel nickel plated 9” / 229mm pulleys with bronze self lubricating bushings.Non spin fatigue resistant 9/16” / 14mm cables are routed on double stacked pulleys (versus four stacked) to reduce stress and wear.
- Low pressure hydraulics provides longer life - 4”ID x 65” /102mm ID x 1651mm cylinder is mounted under the runway and use a premium “Parker” seal and wear ring with chrome plated plunger shaft.
- Designed for optimum productivity - Single point control with stainless steel cylinder air releases engage 12 locking positions. Adjustable locking ladders 81” x 2-3/4” x 3/8” / 2057mm x 70mm x 9.5mm thick allow for accurate levelling. Power unit can be mounted on a front or rear column. Built in runway compressed air outlets front and rear.
| Capacity | 19,000 lbs / 8.6T |
| Overall Length Extended Model | 301 1/2" / 7659mm |
| Overall Length Standard Model | 274 1/2" / 6972 mm |
| Deck Length Extended Model | 238” / 6045mm |
| Deck Length Standard Model | 211” / 5359mm |
| Overall Width | 150” / 3810mm |
| Deck Width | 23” / 584mm |
| Lowered Height | 10” / 254mm |
| Raised Height | 74” / 1880mm |
| Min. 4 Wheel Align. WB | 84” / 2134mm |
| Max.4 Wheel Align. WB | 164 1/2” / 4178mm |
| Max. 2 Wheel Align. WB | 209” or 182” / 5309mm or 4623mm |
| Max. Service WB | 220” or 193” / 5588mm o 4602mm |
| Lift Time | 70 seconds |
| Power Requirement | 230V - 60Hz - 1 Ph - 20amp |
| Shipping Weight | 5,000 lb. / 2.3T |
| Part Number | TLS419ALCRx1/ TLS419ALCXx1 |
 |
 |
 |
 |
 |
| Jacking beam TLS-RJ9HD | Stainless Steel Turnplates TLSSTP | Runway Step Platforms TLSMWS |
 |
 |
 |
| Open runway slots under rear slip plates | Pulley and cables | Double wall deck with Z rail |
