Description
- Built to higher quality standard;100% North American made - premium US Monarch (Bucher) 4HP / 3kw power unit.
- Corrosion resistant protection - steel components are wheel-a-brator shot blasted and acid washed before a “double bake” powder coat finish is applied.
- Superior structural strength provides longer life - Non flex double wall 24” / 610mm wide runways with built in “Z” rail. Heavy duty 10” x 8-3/8” / 254mm x 213 mm wall columns and 4” x 8”/ 102mm x 204mm tall tube traverse beams.
- Greater flexibility with more models to chose from - Close between a 30,000lb. / 13.6T or 33,000lb. / 15T version. Available in three (3) runway lengths with service deck or optional with radius plate pockets. Lift can be ordered in red or blue.
- Premium options and accessories can expand the capabilities and service life - optional front radius plate pockets, built in tire inflation hoses, removable work steps, LED runway lighting and premium 15,000lb. / 6.8T jacking beams.
- Lower maintenance costs
- Zirk style grease fittings at all 1 1/2” / 38mm plated hinge pins. Runway under rear slip plates is open to prevent water and dirt collecting. Thirty 7/8” / 22mm enclosed plated steel slip plate balls provide better support with minimal maintenance.
- Extended Life “Non Twist” Cable design - Machined steel nickel plated 12-3/4” / 324mm pulleys with bronze self-lubricating bushings. Non spin fatigue resistant 5/8”/ 16mm cables are routed on double stacked pulleys (versus four stacked) to reduce stress and wear.
- Low pressure hydraulics provides longer life - 5”ID x 69” / 127 x 1753 cylinder is mounted under the runway and use a premium “Parker” seal and wear ring with chrome plated plunger shaft.
- Designed for optimum productivity - Single point control with stainless steel cylinder air releases engage 8 locking positions. Adjustable locking ladders 87” x 3 3/4” x 3/8” / 2210mm x 95mm x 9.5mm thick allow for accurate levelling. Power unit can be mounted on a front or rear column. Built in runway compressed air outlets front and rear. Lifts 70 1/4”/ 1784mm from the floor.
| STD | EXT | X-LONG | |
|---|---|---|---|
| Capacity | 30,000 lb. / 13.6T or 33,000 lb. / 15T | ||
| Overall Length | 328-1/4” / 8338mm | 364-1/4” / 9252mm | 400-1/4” / 10166mm |
| Deck Length | 261” / 6629mm | 297” / 7544mm | 333” / 8458mm |
| Overall Width | 150” / 3810mm | ||
| Deck Width | 24” / 610mm | ||
| Lower Height | 10" / 254mm | ||
| Raised Height | 70-1/4” / 1784mm | ||
| Width Between Runways | 42” to 48” (1067mm to 1219mm) | ||
| Drive Through Clearance | 133” (3378mm) | ||
| Column Height | 92 1/4” (2343mm) | ||
| Maximum Wheelbase | 241” / 6121mm | 277” / 7036mm | 313” / 7950mm |
| Lift Time | 100 seconds | ||
| Power Requirements | 230 Volts AC - 60 Hz - 1 Ph - 20 Amp | ||
| Shipping Weight | 7,500 lbs. / 3.4T | ||
| Standard Model | 4T430CSSR1 / 4T433CSSR1 | ||
| Extended Model | 4T430CXSR1 / 4T433CXSR1 | ||
| Extra Long Model | 4T430CESR1 / 4T433CESR1 | ||
 |
 |
 |
 |
 |
| North American Power Unit / Air Mechanical Locking System with Regulator | North American Power Unit / Air Mechanical Locking System with Regulator | 24”/ 610mm Double Wall Non Sag Runways |
 |
 |
|
| Rolling Air Hydraulic Jacks #TLS-RJ15 | 13”/ 330 mm Machined Pulleys with 5/8” / 15.9mm Cables |
